Back to Top
Similar in design to the Mobile field bins, the centre lift bins offer ease of maneuverability with little compaction in the paddock.

With the need to travel during harvest, the centre lift design allows the bin to zero turn and can be towed along roads at a safe reasonable speed. The down side to this design is that it is not recommended to move the bin with grain in it and as most customers say, this is a built safety feature. Railway crossing, creek crossings, banks and gullies are no problem due to the centre lift bins heavy duty hydraulic adjustable draw bar allowing the bin to tilt. The hydraulic lift phasing cylinders operate the dual axle walking beam smoothly up and down and maintain level lifting.

The double I-Beam chassis design provides a foot print that gives almost perfect floatation in all soil conditions. Inside the 100T and 115T CL bins are single full length hydraulic adjustable cut-off plates were as the 130T and 145T bins are fitted with 50/50 split hydraulic adjustable cut-off plates that allows the bin to be emptied more evenly and gives the farmer the ability to blend grain for better returns.

The low 3.6 meter fill height gives clear vision into the mother bin from the tractor and chaser bin while dual heavy duty roll tarps allows the chaser bin driver to load from either side and fill the bin full. Being able to load into the field bins from both sides avoids downtime as trucks can load from the bin on one side and chaser bins can unload into the bin from the other.

Standard Features
  • Choice of 100T, 115T, 130T or 145T
  • Phasing Cylinders Ensure
    Level Lifting
  • Split Front and Rear cut-offs
    (130T & 145T)
  • Hydraulically Adjustable
    Draw Bar
  • Zero Turn Capability
  • Double Rail Chassis
  • 15" Unloading Auger
  • Front & Rear Inspection Windows
  • 6T per minute Unloading capacity
  • Stainless Steel Hydraulic Lines
  • Double Heavy Duty Roll Tarp
  • Full Length Cleanout Side
  • External Greasing Points
  • 2Pak Automotive Paint
  • Heavy Duty Toolbox
  • External & Internal
    Access Ladders
  • Auger Work Light

Specifications

SIZE 100T 115T 130T 145T
  AXLES DUAL AXLE DUAL AXLE DUAL AXLE DUAL AXLE
  TYRES SUPER SINGLES 295x75x22.5" 295x75x22.5" 295x75x22.5" 295x75x22.5"
LENGTH 15.5m 17.0m 18.5m 20.0m
HEIGHT 4.0m 4.0m 4.0m 4.0m
WIDTH 4.2m 4.2m 4.2m 4.2m
AUGER CLEARANCE 4.5m 4.5m 4.5m 4.5m
 BIN LENGTH 12.0m 13.5m 15.0m 16.5m
BIN WIDTH 3.8m 3.8m 3.8m 3.8m
  FILL HEIGHT 3.6m 3.6m 3.6m 3.6m
WHEEL CENTRES 3.6m 3.6m 3.6m 3.6m
TONGUE HEIGHT 125 - 1000mm 125 - 1000mm 125 - 1000mm 125 - 1000mm
GROUND CLEARANCE 600mm 600mm 600mm 600mm
ACTUAL TONNAGE# 104.1T 117.6T 130.2T 143.3T
CAPACITY m³ 130.1m³ 146.4m³ 162.8m³ 179.1m³
[#] ACTUAL TONNAGE BASED ON FILLED FROM CENTRE - PEAKED AT 12° - ROLL TARP CLOSED - 0.8 OF A TONNE PER CUBIC METRE ALL SPECIFICATIONS CORRECT AT TIME OF PRINT AND SUBJECT TO CHANGE WITHOUT NOTICE

Standard Features

Optional Features